Descripción

The specific parameters of the Caterpillar 352D excavator may vary depending on the year, configuration or market region. However, based on the information I searched, I can provide some general parameters about the Caterpillar 352 series excavators, especially for the new generation CAT® 352 hydraulic excavator from Caterpillar, which may be of reference to you:
Operating weight of the whole machine:
Approximately 49,900 kg to 50,600 kg, depending on the configuration
Bucket capacity:
Bucket capacity ranges from 2.7 m³ to 3.6 m³, depending on bucket type and configuration. There is information indicating that the bucket capacity can reach 3.2 m³ (rock bucket) or 3.4 m³.
Engine:
The engine model may be Cat® C13 or C13B.
Rated power is between 303 kW and 332 kW, depending on engine model and speed.
Parameters such as rated speed and maximum torque will also vary, but are usually related to the engine model.
Performance parameters:
The swing speed is about 8.3 rpm.
Parameters such as climbing ability and travel speed will also vary depending on the specific configuration.
Hydraulic system:
The maximum flow of the main pump can reach 779 L/min.
The pressure settings of the working hydraulic oil circuit, travel hydraulic circuit and swing hydraulic circuit will also vary, but are usually between 35 MPa and 26 MPa.
Oil capacity:
The fuel tank capacity is about 715 L.
The hydraulic oil tank capacity is about 217 L.
The engine oil change amount and coolant capacity will also vary, but are usually between 40 L and 52 L.
Main dimensions:
The total transport length, total width and total height will vary depending on the specific configuration, but are usually in the range of 11,580 mm to 3,530 mm to 4,040 mm.